KB-20 Series
PM_KB20
Technical Data and Specifications

General Specifications

Height of boom to ground in lowest travel position (based on 37 in. chassis height) 11 ft.
Boom length (16 ft. with 4 ft. extension) 20 ft.
Optional boom lengths (fixed) 16 / 17 / 18 ft.
Boom rotation 270° non-continuous
Lifting capacity at 20 ft. (with bucket) 3,300 lbs. (standard)
3,600 lbs. (optional)
H Style outriggers
Outrigger (extended) 11 ft. 8 in.
Outrigger (retracted) 8 ft.
Hydraulics Tandem pump for simultaneous operation of multiple functions
Operator controls
Standup Individual levers or pilot operated hydraulic joysticks
Rotating platform Mechanical joysticks or pilot operated hydraulic controls

Bucket

360° continuous rotation
Width 4 ft.
Fully open 5 ft.
High strength tempered steel replaceable cutting edges

Recommended Chassis

Cab to axle (CA) See Chassis Requirements
Front axle 12,000 lbs. (minimum) – single rear axle
14,000 lbs. (minimum) – tandem rear axle
Rear axle 21,000 lbs. (minimum) – single rear axle
40,000 lbs. (minimum) – tandem rear axle
GVW 33,000 lbs. (minimum) – single rear axle
54,000 lbs. (minimum) – tandem rear axle
Engine 225 HP (minimum)
Transmission Automatic or manual
Frame 1,500,000 RBM

Body

Length 18 / 19 / 20 ft.
Capacity 20 / 24 / 25 / 30 cubic yds.
Tilt to 45° for dumping
Door style Single, double, or scow
Floor 3/16 in. (1/4 in. optional)
8 in. main sill, 4 in. joist with 12 in. spacing
Sides Side ribs 24 in. spacing
Tarp Spring assist with arm, spring assist armless, electric with arm
Lighting Incandescent and L.E.D.
Mid-body turn signals (where applicable)
Smart light (optional)
Customer specific light location

KB-220 Series
PM_KB220

The KB-220 Series functions in Solid Waste, Tree Care, and Forestry Industry. Quality built with pride.

 Technical Data and Specifications

General Specifications

Height of boom to ground in lowest travel position (based on 42 in. chassis height) 12 ft. 6 in. stand up
13 ft. 1 in. rotating platform
Boom length 22 ft. fixed
Optional boom lengths 25 ft. (22 ft. with 3 ft. extended)
Boom rotation 270° non-continuous (stand up)
360° continuous (rotating platform)
Lifting capacity at 22 ft. (with bucket) 3,000 lbs.
A Style outriggers
Hydraulics Tandem pump for simultaneous operation of multiple functions
Operator controls
Standup Pilot operated hydraulic joysticks
Rotating platform Mechanical joysticks or pilot operated hydraulic joysticks

Bucket

360° continuous rotation
Width 4 ft.
(optional 32″)
Fully open 5 ft.
High strength tempered steel replaceable cutting edges

Recommended Chassis

Cab to axle (CA) See Chassis Requirements
Front axle 16,000 lbs. (minimum)
Rear axle 30,000 lbs. (minimum) – single rear axle
40,000 lbs. (minimum) – tandem rear axle
GVW 46,000 lbs. (minimum) – single rear axle
56,000 lbs. (minimum) – tandem rear axle
Engine 250 HP (minimum)
Transmission Automatic or manual
Frame 1,800,000 RBM

Body

Length 20 or 24 ft.
Capacity 30/ 40 / 56 cubic yds.
Tilt to 45° for dumping
Door style Single, double, or scow
Floor 3/16 in. (1/4 in. optional)
4 in. joist with 12 in. spacing
Sides Side ribs 24 in. spacing
Tarp Spring assist with arm, spring assist armless, electric with arm
Lighting Incandescent and L.E.D.
Mid-body turn signals (where applicable)
Smart light (optional)
Customer specific light location

 

SKB-20 Series
PM_SKB20

Technical Data and Specifications

General Specifications

Height of boom to ground in lowest travel position (based on 37 in. chassis height) 12 ft. 9 in.
Boom length (16 ft. with 4 ft. extension) 20 ft.
Optional boom lengths (fixed) 16 / 17 / 18 ft.
Boom rotation 270° non-continuous
Lifting capacity at 20 ft. (with bucket) 3,300 lbs. (standard)
3,600 lbs. (optional)
H Style outriggers
Outrigger (extended) 11 ft. 8 in.
Outrigger (retracted) 8 ft.
Hydraulics Tandem pump for simultaneous operation of multiple functions
Operator controls
Standup Indvidual levers or pilot operated hydraulic joysticks
Rotating platform Mechanical joysticks or pilot operated hydraulic controls

Bucket

360° continuous rotation
Width 4 ft.
Fully open 5 ft.
High strength tempered steel replaceable cutting edges

Recommended Chassis

Cab to axle (CA) See Chassis Requirements
Front axle 12,000 lbs. (minimum) – single rear axle
Rear axle 21,000 lbs. (minimum) – single rear axle
GVW 33,000 lbs. (minimum) – single rear axle
Engine 190 HP (minimum)
Transmission Automatic or manual
Frame 1,500,000 RBM (minimum)

 

SKB-220 Series

OLYMPUS DIGITAL CAMERA

Technical Data and Specifications

General Specifications

Height of boom to ground in lowest travel position (based on 40 in. chassis height) 13 ft. rotating platform
Boom length 22 ft. fixed
Optional boom lengths 25 ft. (22 ft. with 3 ft. extended)
Boom rotation 270° non-continuous (stand up)
360° continuous (rotating platform)
Lifting capacity at 22 ft. (with bucket) 3,000 lbs.
H Style outriggers
Hydraulics Tandem pump for simultaneous operation of multiple functions
Operator controls
Rotating platform Mechanical joysticks or pilot operated hydraulic joysticks

Bucket

360° continuous rotation
Width 4 ft.
Fully open 6 ft.
High strength tempered steel replaceable cutting edges

Recommended Chassis

Cab to axle (CA) See Chassis Requirements
Front axle 12,000 lbs. (minimum)
Rear axle 21,000 lbs.
GVW 33,000 lbs.
Engine 200 HP (minimum)
Transmission Automatic or manual
Frame 1,800,000 RBM

 

All design, specifications and components are subject to change at the manufacturer’s sole discretion at any time without notice. Data published herein is for information purposes only and shall not be constructed to warrant suitability of the unit for any particular purpose, as performance may vary with the conditions encountered. The only warranty is our standard written warranty for this product at the time of shipment.

 


manufactorer-logos